[How To] Create a Live USB of your Favorite Linux Distro

Well, after enjoying the power of Windows 7, I decided to go back to some of my favorite Linux flavors. I like testing out different flavors of Linux and my favorite is Ubuntu. I like it because it’s robust, the community is large enough to provide you with help and the software is easily available.

With the new release of Fedora 14, came many online debates about which one is better- Ubuntu or Fedora? So I decided to try out Fedora.

If you have never tried any Linux, I would recommend you to do so now! Here is a quick tutorial which will help you run or install a linux distro using a Flash/Pen Drive.

Things You Need

  1. A good computer with a fast internet connection to download the disk image of the Linux you want to try. Distros are usually 600-700 Mb
  2. A Pen Drive(1GB minimum)
  3. A Brain! (just kidding, it’s as simple as 1-2-3)

NOTE: The USB key will be formatted, so don’t forget to backup the data in the USB you’re going to use.

Install Linux Live USB Creator

There are many ways to make a USB drive bootable, but the simplest way to do so is using a tool called Linux Live USB Creator which will not only make your Flash Drive bootable, but will also help you extract ISO image and make the Flash Drive ready for Linux Installation. Download Linux Live USB Creator from here and open the software


Follow the Steps below:

  1. Choose your Flash Drive/ Pen Drive – If it’s not listed, make sure that your Pen/Flash Drive is connected to your computer and then click on the Refresh button on the side).
  2. Choose a Source – If you’ve downloaded the ISO Image, then click on ISO/IMG/ZIP and browse to select your ISO Image(example- Fedora.ISO). If you have the CD of the Linux Distro then click on CD. If you want to download the distro, then click on Download and choose the Linux Distro you want to download and then choose between Manual and Automatic Download.
  3. Persistence mode is used to store the application, log files, information on the USB so that you don’t have to install applications every time you insert the USB in a new computer. This mode can be used by few of the Linux Distros. If you want to install the Distro in your computer then there is no need to use persistence mode.
  4. If you want to Hide the Linux files on the USB then check on the Hide Created Files on Key Option. Check the Format the key in FAT32 format option. If you want to try the Linux without rebooting your computer, check the third option, this will download some files from it’s server and will run the Linux distro in a Virtual Box.
  5. Click on The lightning icon to start the installation process. Now, LiLi will extract the files from the ISO image and then your USB will be ready to use.
  6. After this, shut down the computer and then start it with USB Key connected to the drive. As soon as the Splash Screen of your motherboard appears, press F2 ( Or the key used to access BIOS settings).
  7. Now, go to BOOT Option and then Enable Boot From USB First or anything similar to this term. After enabling it, Save and Exit from the BIOS and now, you’re done! You will now see the booting screen of your Linux Distro and then run the install (if you want to install), and if you don’t want to install it, then start exploring it using the live mode. After you install, don’t forget to revert back the changes you did with the BIOS.

NOTE: Many Linux Flavors allow you to install the Linux side by side of Windows. If you want to use Ubuntu, then try Wubi. Wubi is a free application which lets you install Ubuntu side by side of Windows without the hassle of booting from a CD or USB Key.

Link: Linux Live USB Creator

How to Connect your Xbox 360 to USB modem Quickly

xbox Most of us connect our XBox 360 to internet using a router via normal ethernet cable. But what if you’re having only a usb broadband dongle? This device sadly can’t just be put into one of the three USB ports on the Xbox 360. So you will definitely need a computer or a laptop with a ethernet port and a ethernet cable for this device to work and get connected.

You might think that both Xbox 360 and Windows being Microsoft products, it would be much easier to connect them together. But this isn’t the case. So how do you connect them together?


As you can see, mobile internet through broadband dongle can deliver maximum speed of upto 7.2 Mbps, still you can experience a lag while playing. When comparing the connection speeds from the world’s most popular 3G providers like 3 Mobile, Vodafone,Orange etc, the final transfer speeds may seem to be decent, but the downside of using a 3G connection for gaming is your ‘ping’. And to experience a smooth playing environment, the ping must be less than 100ms, but on a 3G connection the least you could get is around 300-400ms. Though it sucks, it’s better than nothing.

How to Connect Usb broadband dongle to Xbox 360

  1. First, connect your desktop computer or laptop to internet with USB broadband dongle.
  2. Connect your computer and Xbox with the Ethernet cable.(don’t ask me how)
  3. Take Control Panel> Network and Sharing Center > Manage Network Connections500x375_thumb1
  4. Enable sharing on your internet connection (the one you’re using). Also tick the check box for ‘Allow other network users to connect through this computer’s connection’ and select ‘Local Area Connection’ for the ‘Home networking connection’ menu.500x375_thumb3Image credit:http://reabo.co.uk and http://www.broadband-expert.co.uk/
  5. Test your Xbox live connection and check whether it succeeds to connect to internet.(If not make both connections to public instead of private)
    For testing,move to Test Xbox Live Connection option and click A


If it succeeds, you will get the image below on your tv set.


Happy Gaming!

Links: reabo | Broadband Expert

[Editor’s Note: This post is submitted by our guest blogger Ripe aka Renjith, who is a web-a-holic and his keen interests include blogging, travelling and photography.

If you, too would like to write for Devils Workshop, please check this. Details about our revenue sharing programs are here.]

Using Tata Plug-2-Surf USB Modem on Mac OS X Leopard

This is for all Mac users in India who are using Tata’s plug-2-surf USB internet or planning to buy it.

Although there is no official support from Tata to use plug-2-surf on Mac, it is fairly simple. Just follow steps listed below…

1. Just plug your USB modem to any USB port available on MAC. Wait for green light to turn on.

(image via: Techie Cocktail)

2. Next open Mac’s System Preferences. Select Network settings.

3. Under Network settings, for Qualcomm CDMA Technologies MSM connection, use following values:

  • Telephone Number: #777
  • Account Name: internet
  • Password: internet

After this, go to “Advanced” Settings.

4. In Advanced settings, modify two fields:

That’s it, hit OK.  Click Connect on next screen (Step #3).

I am experiencing a lot with Mac and quite comfortable with it. So if you guys have any general questions related to Mac, please feel free to ask them here.

I do not code apps for Mac as of now, but hope to do that someday. 🙂

Related: Enabling Bluetooth File Transfer on Mac OS X Leopard